EAA Builders Log Website
EMail address:
Password:
- Lost my password
close
EAA Builders Log
(An EAA website).
Help
Contact Us
About
Sign Up
Login
Project:
SpiritOfMudsuck
-
Listing of Entries
(Please mouse-over any icon to get a description of that function).
Categories
Show All Entries
- (686)
Avionics
- (33)
Cockpit
- (33)
Controls
- (69)
Cowling
- (29)
Documents
- (5)
Empennage
- (105)
Engine
- (78)
-
Clamps for Secondary...
-
Mixture Control Arm...
-
Mixture Control Cable
-
Mixture Control Cable
-
Makeup new oil lines
-
Attach Oil pressure...
-
Turbo cooling plumbing
-
EGT sensors
-
Low oil level mark
-
Turbo Exhaust Flange
-
Secure oil lines
-
Install turbo oil...
-
CHT & oil...
-
Attach oil cooler...
-
Oil Cooler Baffling
-
Cutout cooling air...
-
Turbo Radiator...
-
Remove Center...
-
Port rear baffle fitup
-
Fit Turbocharger Intake
-
Port Side Baffle...
-
Reinforce oil filter...
-
Turbocharger Mounting
-
Turbo Radiator/Plenum
-
Mount/Plenum for...
-
Set Cooling Lines...
-
Set Nutplates on...
-
Master...
-
Waste Gate Actuator...
-
Turbocharger Fitup
-
Research alternate...
-
Starboard Cylinder...
-
Cooling Pump Test
-
Aft oil line clamp
-
Remove Turbo, Tap...
-
Oil return line from...
-
Turbo Shroud
-
Secure Oil Lines
-
Install Port CHT...
-
Plenum for Turbo...
-
Oil Vapor Vent Line
-
Install AN4 oil lines
-
Turbo/Intake/Starter...
-
Turbo Cooling...
-
Install oil pressure...
-
Tubocharger Fit
-
Manifold Alignment
-
Install bulkhead to...
-
Spark plug passthrough
-
Cooling Baffle
-
Secure Port Side Baffle
-
Baffle Support
-
Mark Dip Stick
-
Cooling Baffle Fitup
-
Initial Fence Baffle...
-
Secondary Ignition...
-
Oil Return Line
-
Turbocharger Mount
-
Drill & Tap Oil...
-
Check Upper Turbo...
-
Mount Exhaust Manifold
-
Engine Mounting,...
-
Bolt Engine Mount to...
-
Install Time-Serts,...
-
Install Port Head...
-
Push-rod Assembly
-
Assembly
-
Determine Cylider...
-
Trim cylinder head...
-
Evaluate & Dress...
-
Setup Compression Ratio
-
Assembly, Torque...
-
Case Prep &...
-
Crankshaft &...
-
Case prep
-
Cam and Crank Assembly
-
Pickup AeroVee Kit
-
AeroVee 2.1 Turbo...
Ext. Finish
- (34)
Firewall Forward
- (14)
Fuel System
- (6)
Fuselage
- (14)
Hangar
- (106)
Interior Finish
- (6)
Instrument Panel
- (72)
Inspection
- (2)
Landing Gear
- (6)
Propeller
Radios
- (8)
Research
- (21)
Tools
- (11)
Wings
- (34)
Builder Name:
Pete Dailey
-
Project:
Sonex - Xenos-B Motorglider
-
VIEW REPORTS
Total Hours:
1506.3
Total Flight Time:
Total Expense:
$75148.03
Start/Last Date:
Jul 01, 2016 - No Finish Date
Engine:
Aerovee 2.1 Turbo
Propeller:
Sensenich
Panel:
MGL Avionics Explorer iEFIS/ECB/RDAC
Friendly URL:
https://eaabuilderslog.org?s=SpiritOfMudsuck
Home or Last Project Picture
Jul 13, 2019
Makeup new oil lines
- (3.5 hours)
Category: Engine
Made new oil lines to route from engine to oil filter and oil filter to turbocharger using braded AN4 hose and Aeroquip fittings. Secured lines to engine mount tubes with cushion clamps.
NOTE: This information is strictly used for the EAA Builders Log project within the
EAA organization
.
-
Policy
-
© Copyright 2024 Brevard Web Pro, Inc.